How to build an Apache helicopter step by step.

How to build an Apache helicopter step by step.

How to draw an Apache helicopter with this video and step-by-step drawing instructions. Drawing lessons for beginners and everyone.

Also, read  bird drawing

Step 1

I will try to destroy this helicopter as best I can. Start by making a shape that resembles a piece of pizza. It should also include the upper crust. As you can see, your Apache helicopter will look very realistic after completing this step. You will first pull the airbags for the turboshaft twin-axle engine, and then draw cylindrical shapes for the holes along with the Hydra Rocket Launcher. I pulled the rocket out because I didn’t want the lesson to be too much. Then you will only pull the legs and wheels of the landing gear. Then, pull the night vision unit, as well as Gunner’s sensor bridge, right in the middle of the helicopter on the fuselage. You will then move down a bit until you reach the area where you will fire the M230 30mm automatic cannon.

Step 2

You will begin this phase by sketching the shape of the radar dome and central rotor, which contains the propellers or propellers of the helicopter. Take your time to make it look neat and tidy.

Step 3

You will now begin to spend your time sketching the Apache shell. The protrusions you see at the top have twin turbochargers, so be sure to pull them out properly. When you feel confident that the body of the AH-64 is tailored to your liking, you can continue the third step.

Step 4

As a next step, let’s tackle the quest to attract wings as well as the pillars used to hold Hydra and Hell rocket launchers. After working here, you can go down to the fifth step.

Step 5

As you can see, your Apache helicopter will look very realistic after completing this step. You will first pull the airbags for the turboshaft twin axle engine, and then draw cylindrical shapes for the holes along with the Hydra Rocket Launcher. I pulled the rocket out because I didn’t want the lesson to be too much. Then you will only pull the legs and wheels of the landing gear. Then, pull the night vision unit, as well as Gunner’s sensor bridge, right in the middle of the helicopter on the fuselage. You will then move down a bit until you reach the area where you will fire the M230 30mm automatic cannon. Outline all the details and surface shapes as you see here and then move on to the sixth step.

Step 6

Now it’s time to start sketching the details of the hull, including the pilot and gunner seating holes, as well as the seam, rivet holes. Sketch in such windows, and then sketch in body frames and explain surfaces and details. Who is sitting where Well, the front window is where the pilot sits, and the rear window is where the gunner sits.

Step 7

Almost done, friends! Here you will sketch or draw in four such blade systems, and remember to take your time as the base must be kept clean for accuracy

Step 8

And finally, pull the tail of the helicopter like this, and even though you can’t see it, there’s supposed to be a tail rotor just behind the propeller in the upper right. Clear your sketch or drawing so that you can prepare it for some serious color.

 

Step 9

When done, it will look like a finished product. Now you can add fun colors to your AH-64 Apache using OD Green Shade.

Also read Money transfer checklist: Before you exchange currencies,