Parking lot lighting is very important because it not only enhances the aesthetic appeal of a property but can also reduce accidents and eliminate risk. In addition, it also has many other benefits, including reducing energy consumption. Here are some important factors to consider when choosing parking lot lights. A good parking lot light should be uniform in illuminance, color rendering, and color temperature, and should be durable enough to withstand the harshest weather conditions, including dust and moisture.
Length of poles
The length of parking lot poles depends on the size and type of parking area. Parking lot lights generally have poles between twelve and twenty feet in length. Choosing the correct length is important to avoid shadows and maximize light coverage while minimizing the number of poles required for the parking lot. Higher poles are also more expensive to install and maintain. Taller poles are recommended for large parking lots and those located in more rural areas.
The height of light poles can vary widely, depending on the type of light and the area. Small parking lots may need as few as nine feet, which is sufficient for adequate lighting. In case of a large parking lot, the maximum height for light poles could be twelve to fourteen feet. While there are no standard height requirements, many counties have regulations about maximum heights. Listed below are some tips for choosing the correct height for light poles.
Lumen output
The ideal Lumen output for parking lot lights depends on the type of space you have, the amount of traffic, and the time of day. In some cases, it can be challenging to choose the right lighting for the parking lot. and In other cases, a high Lumen output can be scary – think of an airport runway! In any case, illuminating a parking lot with low lumens will not provide the proper security. Lumen output, also known as kilowatt-hour, is the most accurate way to determine the brightness of parking lot lights.
The mounting height of parking lot lights varies from 12 to 20 feet, with some models reaching 35 ft. The higher the light, the fewer poles you need. When choosing the height of your parking lot lights, keep in mind their Lumen output and how well you will use them. High-lumen output lights are typically preferred in car dealerships and banks. For optimum visibility, consider a light with at least 40,000 Lumens.
Cost
LED lights are more energy-efficient and have a much longer lifespan than standard HID lamps. An LED bulb should last more than 50,000 hours. However, maintenance costs should be factored into your budget plan. LEDs also offer color rendering index of 95, making them much closer to the ideal light source. Additionally, LED lights are more affordable than HID bulbs, which can increase your total cost by 20%. LEDs can be installed in a parking lot for a fraction of the cost.
In addition to ensuring safe and comfortable parking areas, adequate lighting can also help prevent accidents and reduce the risk of injury. There are other important aspects of parking lot lighting that you should consider. Color rendering, uniformity of illuminance, and color temperature are all essential indicators of lighting quality. Finally, they should be durable enough to withstand extreme weather conditions, moisture, and dust. However, the initial investment in parking lot lights can quickly add up, so it is best to consider your company’s needs and priorities before selecting the type of lighting you want for your lot.
Lifespan
The average life expectancy of parking lot lights is 10 to 15 years, but the life of LEDs can increase this number. LED fixtures are highly efficient and can last more than twenty years, but they are also more expensive to buy. Compared to LED lights, conventional metal halide and high-pressure sodium bulbs are not as efficient and typically produce less light. The lifespan of these bulbs is reduced by weather and on/off cycles, and can be as low as five to seven years.
LED light fixtures are highly durable and can last as long as 100,000 hours before needing to be replaced. They also require less overall lighting equipment and last for many years longer than HID bulbs do. LED light fixtures are more cost-effective and reduce maintenance costs by lasting for several years, whereas HID lights begin to degrade over time before complete failure. Additionally, LEDs can be spread out over a larger parking lot with fewer fixtures. Furthermore, they improve visibility for drivers and reduce accident risk.
Surge protection
Surge protection for parking lot lights is an important part of electrical safety. and Surge protection devices are electronic devices that detect and redirect intense pulses of electricity. If a surge occurs, the device will either absorb the energy or redirect it to the SPD. Surge protection devices are most effective when they can perform their functions repeatedly. Here are some tips on choosing a good surge protection device for parking lot lights. Listed below are some of the most important features of a surge protection device.
First and foremost, a surge protection device should be listed according to ANSI/UL 1449-2006, which is the national standard. Prior to this standard, there were no specific safety requirements and often, these rudimentary arrestors left owners in the dark and in need of expensive repairs. Surge Suppression LLC’s solution is different. It features an IEEE/ANSI-compliant enclosure and protects fixtures from surges up to 320J.
Read: Saudi Arabia Luxury Market Overview 2022-2027 | IMARC Group
